Laboratory and industrial hot air ovens, 50–300 °C, gravity or forced-air convection, 28 L to 200 L+, digital PID control.
Samarth Electronics is an ISO 9001:2015 certified hot air oven manufacturer based in Ambarnath, Maharashtra, and a direct hot air oven supplier in Vadodara. As an established hot air oven exporter, we build the same equipment for buyers in the UAE, Saudi Arabia, Bangladesh, Nepal, Kenya, Nigeria and Sri Lanka. Customers in Vadodara get export-grade quality at factory-direct prices.
A hot air oven heats samples and equipment with circulating hot air in an insulated chamber. It is the most versatile heating instrument in labs and plants. Typical uses are drying glassware, dry-heat sterilisation at 160 °C, moisture determination, pharmaceutical stability studies, and curing coatings and adhesives.
In Vadodara, our hot air oven is used by QC labs of Central Gujarat's chemical and pharma plants; pharma plants in Vadodara, Halol, Savli and Dahej; and university labs in Vadodara and Anand. Units are dispatched from our Ambarnath factory to Vadodara in transit-safe packing, with installation guidance, operator training and spares support.
Samarth Electronics makes two configurations. Gravity convection suits fragile or light samples. Fan-assisted forced-air convection gives ±2 °C uniformity across all shelves for stability testing and component curing. Chambers range from 28 L to 200 L+, all with an SS 304 interior, digital PID control, a timer and an independent over-temperature cut-out.
See the full product range on our Hot Air Oven page, or all equipment we supply in Vadodara.
QC labs of Central Gujarat's chemical and pharma plants use it for glassware drying and moisture tests.
Pharma plants in Vadodara, Halol, Savli and Dahej use it for stability studies and dry-heat sterilisation.
University labs in Vadodara and Anand use it for teaching and research labs.
Engineering and fabrication units in Makarpura GIDC and Savli use it for component drying and curing.
±1–2 °C accuracy with set and actual temperature displayed.
Forced-air gives ±2 °C uniformity across all shelves.
Chamber sized to your sample volume and batch.
Independent thermostat protects samples and the oven.
1 min – 99 h with an end-of-cycle buzzer.
Resists chemical vapours and is easy to clean.
| Temperature range | 50 °C to 300 °C |
| Uniformity | ±2 °C forced-air / ±5 °C gravity |
| Heating | Gravity or fan forced-air convection |
| Chamber sizes | 28 / 50 / 100 / 150 / 200 L |
| Interior | SS 304 |
| Timer | Digital, 1 min – 99 h |
| Safety | Over-temperature cut-out, door switch |
| Power supply | 230 V / 50 Hz; other voltages on request |
Specifications may vary by model and custom configuration. Confirm with our team before ordering.
| Requirement | Recommended | Notes |
|---|---|---|
| Small lab (1–6 items) | 28 L | Gravity or forced-air |
| QC department | 50 L | Forced-air for uniformity |
| Lab group / production batch | 100 L | Multiple shelves |
| Stability testing / large batches | 150–200 L+ | Forced-air, ±2 °C |
Drying glassware (80–110 °C), dry-heat sterilisation (160 °C for 2 hours), moisture determination (100–105 °C), curing adhesives and coatings (80–200 °C), stability testing and annealing metals and plastics.
Gravity convection uses natural air movement and suits fragile or light samples. Forced-air uses a fan to give ±2 °C uniformity across all shelves, which stability testing and component curing need.
Yes. Dry heat at 160 °C for 2 hours sterilises clean metal instruments and glassware that cannot be autoclaved. The oven should be validated for temperature uniformity.
28 L for a small lab, 50 L for a QC department, 100 L for a lab group or production batch, and 150–200 L for stability testing or large industrial batches.
Yes. Units are dispatched from our Ambarnath factory to Vadodara in transit-safe packing, with installation guidance, operator training and spares support. We cover Makarpura GIDC; Nandesari; Halol; Savli; Por; and Padra and the surrounding areas.
Call or WhatsApp +91 9320240250 / +91 9322916496, email response@ultrasoniccleanersmfgr.com, or use our online enquiry form. Tell us your application, sample or part size and daily quantity, and we will send a quotation with the recommended model.
See all ultrasonic cleaners & lab equipment we supply in Vadodara »
Tell us your application, sample or part size and daily quantity. Our engineers will recommend the right model and send a factory-direct quotation.