The most critical step in your electroplating line - ultrasonic degreasing and pickling before chrome, nickel, zinc, gold, silver plating, and anodising. Removes oil, polishing compound, smut, and oxide that cause pitting, blistering, and adhesion failure in the deposit. Multi-tank pre-treatment line configurations available. IEC certified. Mumbai India.
The quality of a plated coating is determined before the part enters the plating bath. Any contamination layer — oil, oxide, smut, or polishing compound — between the substrate and the plating solution prevents direct metal-to-metal bonding, causing pitting, blistering, and peeling. No plating chemistry adjustment compensates for inadequate pre-cleaning.
Samarth Electronics manufactures ultrasonic cleaners specifically configured for electroplating pre-treatment: alkaline degreasing tanks (SS316 construction, high-temperature capability) for oil and grease removal, and acid pickle tanks (chemical-resistant lining) for oxide and smut removal. Multi-tank line configurations — alkaline degreasing → hot rinse → acid pickle → cold rinse — are available as complete systems with separate control panel and automatic basket transfer.
Removes all contamination that causes pitting, blistering, and peeling — preventing costly stripping and replating.
Power density matched to rapid degreasing of polishing compound, drawing oils, and rust-preventative coatings.
Hot alkaline chemistry dissolves mineral oils, saponifies ester oils, and emulsifies greases from all substrates.
SS316L or chemically-lined tanks for acid pickle step per substrate type.
Complete pre-treatment lines: alkaline degreaser → rinse → acid pickle → rinse → plating ready.
Bench-top 3–20L for jewellery plating. Large-format 50–500L for automotive rack and barrel lines.
| Parameter | Specification |
|---|---|
| Frequency | 28–40 kHz |
| Temperature | 55–70°C alkaline degreasing |
| Tank material | SS316L (alkaline) / PP or PVDF lining (acid pickle) |
| Stages | 1 to 4 stages (alkaline clean / rinse / acid pickle / rinse) |
| Tank sizes | 3L bench-top to 500L production line |
| Power supply | 230V/50Hz or 400V/50Hz 3-phase |
| Certification | IEC certified |
Used by electroplating shops, jewellery plating houses, automotive chrome plating plants, and industrial surface finishing operations across India and internationally.
Samarth Electronics exports Ultrasonic Cleaner for Plating Industry to buyers in 12+ countries. Every unit is built at your destination voltage (110V/220V/230V/400V), IEC certified, and ships with full technical documentation, CE declaration where required, and certificate of origin for preferential trade duty treatment.
Since 2006 — thousands of units delivered across India and 12+ export countries.
Full IEC electrical certification. CE-compatible designs available for European buyers.
Every unit built to your specification — tank size, frequency, voltage, automation level.
Material certs, calibration records, IQ/OQ protocols, CE declarations — all supplied.
Parts dispatched to any country within days. Remote technical support always available.
No distributor markup — 40-60% below European brands for equivalent IEC-certified quality.
Tell us your application, quantity, and destination. Our engineers respond within 24 hours with a complete quotation — no obligation.
Send Enquiry Download Catalogue