High-intensity probe sonicator (ultrasonic processor) for cell disruption, DNA/RNA shearing, nano-emulsions and dispersion. 20–24 kHz, 50 W to 1000 W.
Samarth Electronics is an ISO 9001:2015 certified probe sonicator manufacturer based in Ambarnath, Maharashtra, and a direct probe sonicator supplier in Hyderabad. As an established probe sonicator exporter, we build the same equipment for buyers in the UAE, Saudi Arabia, Bangladesh, Nepal, Kenya, Nigeria and Sri Lanka. Customers in Hyderabad get export-grade quality at factory-direct prices.
A probe sonicator, also called an ultrasonic processor or ultrasonic homogenizer, delivers focused, high-intensity ultrasonic energy straight into a liquid sample through a titanium probe. At 20–24 kHz it produces intense cavitation at the probe tip. This disrupts cells, reduces particle size, forms emulsions and drives sonochemical reactions.
In Hyderabad, our probe sonicator is used by biotech and life-science companies in Genome Valley; contract research organisations and R&D centres; and university and institute labs across Hyderabad. Units are dispatched from our Ambarnath factory to Hyderabad in transit-safe packing, with installation guidance, operator training and spares support.
Samarth Electronics probe sonicators have digital amplitude control (10–100% in 1% steps), programmable pulse mode, a real-time energy counter in joules and replaceable titanium probe tips from 3 mm to 25 mm. The range runs from 50 W for microlitre samples to 1000 W for continuous industrial processing.
See the full product range on our Probe Sonicator page, or all equipment we supply in Hyderabad.
Biotech and life-science companies in Genome Valley use it for cell lysis and DNA/RNA shearing.
Contract research organisations and R&D centres use it for nanoparticle and emulsion research.
University and institute labs across Hyderabad use it for teaching and research labs.
API and formulation plants in Jeedimetla, Bollaram, Patancheru and Pashamylaram use it for formulation and nano-emulsion development.
10–100% in 1% steps, from gentle biology to aggressive processing.
On and off time set independently to limit sample heating.
Total joules delivered shown in real time for reproducible runs.
3 mm to 25 mm (custom on request) for 0.5 mL to 10 L samples.
Works with our sonicator chiller unit for temperature-controlled processing.
Amplitude, elapsed time, energy and temperature (with probe sensor).
| Frequency | 20 / 22 / 24 kHz |
| Power output | 50 / 100 / 150 / 200 / 500 / 1000 W (model-specific) |
| Amplitude | 10–100%, 1% resolution |
| Probe diameter | 3 / 6 / 10 / 13 / 19 / 25 mm / custom |
| Sample volume | 0.5 mL – 10 L (probe-dependent) |
| Timer | 1 s – 99 h |
| Pulse mode | On 0.1–9.9 s, off 0.1–9.9 s |
| Energy counter | Joules, real time |
| Power supply | 230 V / 50 Hz standard; other voltages on request |
| Certification | IEC certified |
Specifications may vary by model and custom configuration. Confirm with our team before ordering.
| Requirement | Recommended | Notes |
|---|---|---|
| Microlitre to few-mL biology samples | 50–150 W, 3–6 mm probe | Pulse mode + ice bath |
| Routine lab volumes (10–250 mL) | 200–500 W, 10–13 mm probe | Amplitude control |
| Pilot-scale emulsions & dispersions | 500–1000 W, 19–25 mm probe | Energy counter for scale-up |
| Temperature-critical processing | Any model + sonicator chiller | Controlled sample temperature |
Cell disruption (bacteria, yeast, mammalian cells), DNA/RNA shearing, nanoparticle synthesis, emulsification, graphene and nanotube dispersion, and sonochemistry. These jobs need more power than an ultrasonic bath can deliver.
A bath spreads gentle energy through the whole liquid and suits cleaning and indirect processing. A probe focuses intense energy into a small sample, giving a far higher power density at the tip. Probe sonicators are for sample processing, not cleaning.
Yes. Use pulse mode (for example 5 s on / 5 s off) and an ice bath to limit the temperature rise. For controlled temperature, pair the probe with our sonicator chiller unit.
Smaller tips (3–6 mm) concentrate energy for small volumes. Larger tips (13–25 mm) handle bigger volumes. Tell us your sample volume and application and we will recommend the tip and power.
Yes. Units are dispatched from our Ambarnath factory to Hyderabad in transit-safe packing, with installation guidance, operator training and spares support. We cover Genome Valley; Jeedimetla; Bollaram; Patancheru; Pashamylaram; and Medchal and the surrounding areas.
Call or WhatsApp +91 9320240250 / +91 9322916496, email response@ultrasoniccleanersmfgr.com, or use our online enquiry form. Tell us your application, sample or part size and daily quantity, and we will send a quotation with the recommended model.
See all ultrasonic cleaners & lab equipment we supply in Hyderabad »
Tell us your application, sample or part size and daily quantity. Our engineers will recommend the right model and send a factory-direct quotation.