40–68 kHz precision ultrasonic cleaners for populated PCBs, SMT stencils, connectors and assemblies. DI-water compatible, with dryer options.
Samarth Electronics is an ISO 9001:2015 certified electronics ultrasonic cleaner manufacturer based in Ambarnath, Maharashtra, and a direct electronics ultrasonic cleaner supplier in Surat. As an established electronics ultrasonic cleaner exporter, we build the same equipment for buyers in the UAE, Saudi Arabia, Bangladesh, Nepal, Kenya, Nigeria and Sri Lanka. Customers in Surat get export-grade quality at factory-direct prices.
Electronics assembly needs precision cleaning that will not damage components. At 40–68 kHz the cavitation bubbles are small enough to reach under BGA packages, into fine-pitch connector cavities and between closely spaced leads, where spray nozzles and manual wiping cannot go.
In Surat, our electronics ultrasonic cleaner is used by auto-component and engineering suppliers in Surat and engineering and textile-machinery workshops in Sachin GIDC, Pandesara and Udhna. Surat is a short road trip from our Ambarnath factory, so delivery, installation and service support are quick.
Samarth Electronics electronics cleaners use SS 316L tanks with DI-water inlet and outlet, controlled 40–60 °C temperature to protect components and laminates, dedicated stencil holders and integrated hot-air dryers. They support IPC-7711/7721 cleaning procedures and ROSE ionic-contamination limits.
See the full product range on our Ultrasonic Cleaner for Electronic Industry page, or all equipment we supply in Surat.
Auto-component and engineering suppliers in Surat use it for automotive electronics and sensor assemblies.
Engineering and textile-machinery workshops in Sachin GIDC, Pandesara and Udhna use it for precision electro-mechanical parts.
Small bubbles clean under BGAs and fine-pitch leads safely.
SS 316L tank with DI inlet/outlet for an ion-free final rinse.
Avoids thermal stress on SMDs and PCB laminates.
Vertical stencil holders up to 736 × 736 mm.
Hot-air drying prevents moisture trapped under low-standoff parts.
Process records to support IPC cleanliness validation.
| Frequency | 40 kHz / 68 kHz |
| Tank sizes | 2 L bench-top to 50 L production |
| Chemistry | Aqueous flux remover / saponifier / DI water |
| Temperature | 40–60 °C |
| Stencil size | Up to 736 × 736 mm |
| DI water | SS 316L tank, DI inlet/outlet |
| Certification | IEC certified; IPC documentation available |
| Power supply | 230 V / 50 Hz; other voltages on request |
Specifications may vary by model and custom configuration. Confirm with our team before ordering.
| Requirement | Recommended | Notes |
|---|---|---|
| Repair / rework bench | 2–6 L bench-top, 40 kHz | Small parts and boards |
| EMS line, populated PCBs | 10–30 L, 40/68 kHz | DI rinse + dryer |
| SMT stencils | Stencil cleaner with holder | Up to 736 × 736 mm |
| High-volume assembly | Multi-stage wash–rinse–dry | SS 316L, DI water |
28–40 kHz for SMT stencils. 40–68 kHz for populated PCBs, because the smaller bubbles clean under BGAs and fine-pitch parts without stressing solder joints.
With the right frequency, power and chemistry it is safe for most SMDs. Quartz crystals and MEMS sensors may need shorter cycles, so test a sample board first.
DI water with an aqueous flux remover or saponifier for rosin flux, or a dedicated no-clean flux remover. Always finish with a DI rinse and full drying before test or conformal coating.
Yes. Integrated hot-air dryers prevent moisture being trapped under low-standoff components after cleaning.
Yes. Surat is a short road trip from our Ambarnath factory, so delivery, installation and service support are quick. We cover Varachha; Katargam; Mahidharpura; Mini Bazar; Sachin SEZ; and Sachin GIDC and the surrounding areas.
Call or WhatsApp +91 9320240250 / +91 9322916496, email response@ultrasoniccleanersmfgr.com, or use our online enquiry form. Tell us your application, sample or part size and daily quantity, and we will send a quotation with the recommended model.
See all ultrasonic cleaners & lab equipment we supply in Surat »
Tell us your application, sample or part size and daily quantity. Our engineers will recommend the right model and send a factory-direct quotation.