40–68 kHz precision ultrasonic cleaners for populated PCBs, SMT stencils, connectors and assemblies. DI-water compatible, with dryer options.
Samarth Electronics is an ISO 9001:2015 certified electronics ultrasonic cleaner manufacturer in India and a direct electronics ultrasonic cleaner exporter to Saudi Arabia. Buyers looking for a reliable electronics ultrasonic cleaner supplier in Saudi Arabia get factory-direct pricing, a machine built for 230 V / 60 Hz, and complete export documentation, with no trading margin in between.
Electronics assembly needs precision cleaning that will not damage components. At 40–68 kHz the cavitation bubbles are small enough to reach under BGA packages, into fine-pitch connector cavities and between closely spaced leads, where spray nozzles and manual wiping cannot go.
In Saudi Arabia, our electronics ultrasonic cleaner is used by electronics assembly and repair units; automotive service and component workshops in Riyadh, Jeddah and Dammam; and fabrication and maintenance workshops in Jubail and Dammam. Export units for Saudi Arabia are built for 230 V / 60 Hz and shipped by sea from Nhava Sheva (JNPT) to Jeddah or Dammam, or by air for urgent orders, with a commercial invoice, packing list, certificate of origin and technical datasheets.
Samarth Electronics electronics cleaners use SS 316L tanks with DI-water inlet and outlet, controlled 40–60 °C temperature to protect components and laminates, dedicated stencil holders and integrated hot-air dryers. They support IPC-7711/7721 cleaning procedures and ROSE ionic-contamination limits.
See the full product range on our Ultrasonic Cleaner for Electronic Industry page, or all equipment we supply in Saudi Arabia.
Electronics assembly and repair units use it for populated PCBs, connectors and assemblies.
Automotive service and component workshops in Riyadh, Jeddah and Dammam use it for automotive electronics and sensor assemblies.
Fabrication and maintenance workshops in Jubail and Dammam use it for precision electro-mechanical parts.
Small bubbles clean under BGAs and fine-pitch leads safely.
SS 316L tank with DI inlet/outlet for an ion-free final rinse.
Avoids thermal stress on SMDs and PCB laminates.
Vertical stencil holders up to 736 × 736 mm.
Hot-air drying prevents moisture trapped under low-standoff parts.
Process records to support IPC cleanliness validation.
| Frequency | 40 kHz / 68 kHz |
| Tank sizes | 2 L bench-top to 50 L production |
| Chemistry | Aqueous flux remover / saponifier / DI water |
| Temperature | 40–60 °C |
| Stencil size | Up to 736 × 736 mm |
| DI water | SS 316L tank, DI inlet/outlet |
| Certification | IEC certified; IPC documentation available |
| Power supply | 230 V / 50 Hz; other voltages on request |
Specifications may vary by model and custom configuration. Confirm with our team before ordering.
| Requirement | Recommended | Notes |
|---|---|---|
| Repair / rework bench | 2–6 L bench-top, 40 kHz | Small parts and boards |
| EMS line, populated PCBs | 10–30 L, 40/68 kHz | DI rinse + dryer |
| SMT stencils | Stencil cleaner with holder | Up to 736 × 736 mm |
| High-volume assembly | Multi-stage wash–rinse–dry | SS 316L, DI water |
28–40 kHz for SMT stencils. 40–68 kHz for populated PCBs, because the smaller bubbles clean under BGAs and fine-pitch parts without stressing solder joints.
With the right frequency, power and chemistry it is safe for most SMDs. Quartz crystals and MEMS sensors may need shorter cycles, so test a sample board first.
DI water with an aqueous flux remover or saponifier for rosin flux, or a dedicated no-clean flux remover. Always finish with a DI rinse and full drying before test or conformal coating.
Yes. Integrated hot-air dryers prevent moisture being trapped under low-standoff components after cleaning.
Units are built for 230 V / 60 Hz and shipped by sea from Nhava Sheva (JNPT) to Jeddah or Dammam, or by air for urgent orders. Each shipment includes a commercial invoice, packing list, certificate of origin and technical datasheets.
Call or WhatsApp +91 9320240250 / +91 9322916496, email response@ultrasoniccleanersmfgr.com, or use our online enquiry form. Tell us your application, sample or part size and daily quantity, and we will send a quotation with the recommended model.
See all ultrasonic cleaners & lab equipment we supply in Saudi Arabia »
Tell us your application, sample or part size and daily quantity. Our engineers will recommend the right model and send a factory-direct quotation.