Ultrasonic cleaners for injection, closure and blow moulds. 24" × 18" × 12" tank, 1000 W, 25/33 kHz, up to 80 °C, with power and temperature controllers.
Samarth Electronics is an ISO 9001:2015 certified ultrasonic mould cleaner manufacturer in India and a direct ultrasonic mould cleaner exporter to Bangladesh. Buyers looking for a reliable ultrasonic mould cleaner supplier in Bangladesh get factory-direct pricing, a machine built for 220 V / 50 Hz, and complete export documentation, with no trading margin in between.
During injection moulding, degraded polymer, release agent and gas residue build up in cavities, vents and cooling channels. This causes flash, sink marks and short shots, and eventually means downtime. Manual cleaning with abrasives or picks is slow and damages polished cavity surfaces. Ultrasonic cleaning removes the deposits without touching the surface.
In Bangladesh, our ultrasonic mould cleaner is used by engineering and maintenance workshops in Dhaka and Chattogram and pharma plants in Gazipur, Savar, Tongi and Narayanganj. Export units for Bangladesh are built for 220 V / 50 Hz and shipped by sea to Chattogram, by air to Dhaka, or by road through the India–Bangladesh land ports, with a commercial invoice, packing list, certificate of origin and technical datasheets.
The Samarth Electronics ultrasonic mould cleaner has a 24" × 18" × 12" tank, 1000 W at 25 or 33 kHz, a digital temperature controller up to 80 °C and an ultrasonic power controller. For heavily contaminated moulds, our two-stage mould cleaner first loosens deposits in hot water with air agitation, then finishes the clean in the ultrasonic chamber. Dedicated closure-mould cleaners are also available.
See the full product range on our Ultrasonic Mould Cleaner page, or all equipment we supply in Bangladesh.
Engineering and maintenance workshops in Dhaka and Chattogram use it for dies, inserts and tooling.
Supplied to pharma plants in Gazipur, Savar, Tongi and Narayanganj.
24" × 18" × 12" tank for complete mould halves and inserts.
25 or 33 kHz for stubborn polymer and release-agent deposits.
Adjustable ultrasonic power to protect polished cavities.
Digital, up to 80 °C.
Hot-water pre-clean with air agitation, then ultrasonic cleaning.
Suitable for tool rooms on the shop floor.
| Tank size | 24" × 18" × 12" (H) |
| Ultrasonic power | 1000 W |
| Frequency | 33 or 25 kHz ± 3 kHz |
| Temperature | Up to 80 °C, digital controller |
| Controls | Ultrasonic power controller + temperature controller |
| Construction | SS 304 |
| Options | Two-stage pre-clean, hoist, filtration, rinse and dry |
| Power supply | 230 V / 400 V as required |
Specifications may vary by model and custom configuration. Confirm with our team before ordering.
| Requirement | Recommended | Notes |
|---|---|---|
| Small inserts & cores | Bench-top 20–40 L | 33 kHz |
| Standard mould halves | 24" × 18" × 12" mould cleaner | 1000 W, power controller |
| Heavily contaminated moulds | Two-stage mould cleaner | Hot-water pre-clean + ultrasonic |
| Large or heavy moulds | Custom tank with hoist | Built to mould size |
No. Cavitation removes deposits without abrasion. The power controller lets you reduce intensity for highly polished or textured surfaces.
In most cases, no. Complete mould halves, inserts and cores go straight into the tank, which cuts downtime compared with manual cleaning.
The mould is first heated in a hot-water chamber with air agitation to loosen deposits, then finished in the ultrasonic chamber. It is used for heavily contaminated injection moulds.
The standard tank is 24" × 18" × 12". We build larger tanks and add hoists for heavy moulds.
Units are built for 220 V / 50 Hz and shipped by sea to Chattogram, by air to Dhaka, or by road through the India–Bangladesh land ports. Each shipment includes a commercial invoice, packing list, certificate of origin and technical datasheets.
Call or WhatsApp +91 9320240250 / +91 9322916496, email response@ultrasoniccleanersmfgr.com, or use our online enquiry form. Tell us your application, sample or part size and daily quantity, and we will send a quotation with the recommended model.
See all ultrasonic cleaners & lab equipment we supply in Bangladesh »
Tell us your application, sample or part size and daily quantity. Our engineers will recommend the right model and send a factory-direct quotation.