Ultrasonic bath with an inbuilt chiller that holds 3–35 °C. Used for HPLC degassing, sample extraction and dissolution work without sample heating.
Samarth Electronics is an ISO 9001:2015 certified sonicator with chiller manufacturer in India and a direct sonicator with chiller exporter to Kenya. Buyers looking for a reliable sonicator with chiller supplier in Kenya get factory-direct pricing, a machine built for 240 V / 50 Hz, and complete export documentation, with no trading margin in between.
Ultrasonic energy heats the bath. On long runs a standard sonicator can rise well above room temperature, which can degrade samples, evaporate solvents and change results. A sonicator with an inbuilt chiller removes that heat and keeps the bath at a set temperature for the whole run.
In Kenya, our sonicator with chiller is used by QC labs of pharma and food manufacturers; pharma manufacturers in Nairobi and Thika; and agricultural and medical research institutes. Export units for Kenya are built for 240 V / 50 Hz and shipped by sea from Nhava Sheva (JNPT) to Mombasa, or by air to Nairobi, with a commercial invoice, packing list, certificate of origin and technical datasheets.
Samarth Electronics makes a table-top model (SM-200 US/CH, 400 W, 3–35 °C) and a floor-mounted model (SM-250 US/CH, 500 W, 2 °C to ambient), both with an Emerson-make compressor. For GLP/GMP labs, the chiller sonicator with printer adds a printed, time-stamped record of every run.
See the full product range on our Sonicator with Inbuilt Chiller page, or all equipment we supply in Kenya.
QC labs of pharma and food manufacturers use it for HPLC degassing and assay sample prep.
Pharma manufacturers in Nairobi and Thika use it for dissolution and extraction work.
Agricultural and medical research institutes use it for temperature-controlled sample sonication.
University and research institute labs in Nairobi use it for research sample preparation.
Holds 3–35 °C (table-top) or 2 °C to ambient (floor-mounted).
Set temperature and timer for repeatable runs.
Industrial-grade refrigeration in the same cabinet.
16G SS 304 tank and 18G SS 304 enclosure.
Optional beaker positioner and flask holder for volumetric flasks.
Chiller sonicator with printer gives a GLP record for each run.
| Model | SM-200 US/CH (table-top) |
| Tank size | 450 × 300 × 150 mm |
| Outer size | 600 × 500 × 500 mm |
| Tank / enclosure | SS 304 16G / SS 304 18G |
| Ultrasonic power | 400 W |
| Frequency | 33 kHz ± 3 kHz |
| Bath temperature | 3–35 °C (inbuilt chiller) |
| Compressor | Emerson make |
| Timer | 0–99 min |
| Power input | 230 V AC |
| Floor-mounted model | SM-250 US/CH, 16" × 16" × 16" tank, 500 W, 2 °C to ambient |
Specifications may vary by model and custom configuration. Confirm with our team before ordering.
| Requirement | Recommended | Notes |
|---|---|---|
| Routine HPLC / QC lab | SM-200 US/CH table-top | 450 × 300 × 150 mm tank, 400 W |
| Larger batches / many flasks | SM-250 US/CH floor-mounted | 16" cube tank, 500 W, 2 °C |
| GLP / GMP documented runs | Chiller sonicator with printer | Printed record of every run |
| Probe processing with cooling | Probe sonicator + chiller | Temperature-controlled processing |
Long sonication runs heat a normal bath. That can degrade heat-sensitive samples and evaporate solvent, which changes concentrations. The inbuilt chiller holds the bath at a set temperature, so the results stay consistent.
The table-top SM-200 US/CH holds 3–35 °C. The floor-mounted SM-250 US/CH goes from 2 °C to ambient.
Yes. Our chiller sonicator with printer prints the date, time, temperature and run parameters for GLP/GMP documentation.
Yes. An optional beaker positioner and flask holder keep flasks upright and evenly spaced.
Units are built for 240 V / 50 Hz and shipped by sea from Nhava Sheva (JNPT) to Mombasa, or by air to Nairobi. Each shipment includes a commercial invoice, packing list, certificate of origin and technical datasheets.
Call or WhatsApp +91 9320240250 / +91 9322916496, email response@ultrasoniccleanersmfgr.com, or use our online enquiry form. Tell us your application, sample or part size and daily quantity, and we will send a quotation with the recommended model.
See all ultrasonic cleaners & lab equipment we supply in Kenya »
Tell us your application, sample or part size and daily quantity. Our engineers will recommend the right model and send a factory-direct quotation.