Low-temperature BOD incubator with CFC-free cooling, SS 304 inner chamber, digital controller and full-length glass door.
Samarth Electronics is an ISO 9001:2015 certified BOD Incubator manufacturer in India and a direct BOD Incubator exporter to Nepal. Buyers looking for a reliable BOD Incubator supplier in Nepal get factory-direct pricing, a machine built for 230 V / 50 Hz, and complete export documentation, with no trading margin in between.
A BOD (biochemical oxygen demand) incubator, also called a low-temperature incubator, holds samples at a controlled temperature, usually 20 °C for the standard BOD test, while microorganisms consume oxygen. It is essential for wastewater and effluent testing and is widely used for microbiology, stability and seed-germination work.
In Nepal, our BOD Incubator is used by water-quality and environmental labs; pharma plants in the Birgunj–Hetauda corridor and Kathmandu Valley; and food-testing laboratories. Export units for Nepal are built for 230 V / 50 Hz and shipped by road through Raxaul–Birgunj, Sunauli–Bhairahawa or Jogbani–Biratnagar, or by air to Kathmandu, with a commercial invoice, packing list, certificate of origin and technical datasheets.
The Samarth Electronics BOD incubator has a double-walled chamber with an SS 304 inner and a powder-coated GI exterior, a precise solid-state digital temperature controller, a CFC-free cooling kit with a hermetically sealed, fan-cooled compressor, and overload protection. A full-length glass door lets you check samples without disturbing the temperature. PID microprocessor control with printer or PC output is available on request.
See the full product range on our BOD Incubator page, or all equipment we supply in Nepal.
Water-quality and environmental labs use it for BOD testing of wastewater and effluent.
Pharma plants in the Birgunj–Hetauda corridor and Kathmandu Valley use it for stability and microbiology work.
Food-testing laboratories use it for microbiology and shelf-life testing.
University and research labs in Kathmandu use it for microbiology and environmental-science labs.
Eco-friendly cooling with a hermetically sealed compressor.
Double-walled, with a powder-coated GI exterior.
Solid-state digital controller. PID with printer/PC output on request.
View samples without disturbing the temperature.
Condenser and compressor protection for long, unattended runs.
Insulated chamber and door minimise heat exchange.
| Model | BOD-90 |
| Chamber capacity | 90 L |
| Temperature range | +5 °C to +90 °C (BOD-90); 5–60 °C models available |
| Shelves | 2 |
| Viewing window | Yes, full-length glass door |
| Inner / outer | SS 304 / powder-coated GI |
| Cooling | CFC-free, hermetically sealed compressor |
| Controller | Digital; PID with printer/PC output optional |
| Power supply | 230 V AC, 16 A, 50 Hz |
Specifications may vary by model and custom configuration. Confirm with our team before ordering.
| Requirement | Recommended | Notes |
|---|---|---|
| Water / effluent testing lab | BOD-90 (90 L) | Standard 20 °C BOD test |
| Microbiology lab | BOD-90 with PID | Printer / PC output option |
| Larger sample loads | Higher-capacity model on request | More shelves |
| Documented testing | PID controller + printer | Traceable temperature records |
It holds samples at a controlled low temperature, usually 20 °C for the 5-day BOD test of wastewater and effluent. It is also used for microbiology, stability, fermentation and seed-germination studies.
Models are available for +5 °C to +60 °C. Tell us the temperature your test method needs and we will confirm the right model.
Yes. It uses a CFC-free, eco-friendly cooling kit with a hermetically sealed, fan-cooled compressor and overload protection.
Yes. A PID microprocessor controller with printer interface or PC output is available on request.
Units are built for 230 V / 50 Hz and shipped by road through Raxaul–Birgunj, Sunauli–Bhairahawa or Jogbani–Biratnagar, or by air to Kathmandu. Each shipment includes a commercial invoice, packing list, certificate of origin and technical datasheets.
Call or WhatsApp +91 9320240250 / +91 9322916496, email response@ultrasoniccleanersmfgr.com, or use our online enquiry form. Tell us your application, sample or part size and daily quantity, and we will send a quotation with the recommended model.
See all ultrasonic cleaners & lab equipment we supply in Nepal »
Tell us your application, sample or part size and daily quantity. Our engineers will recommend the right model and send a factory-direct quotation.