Multi-stage ultrasonic cleaning systems with pre-clean, ultrasonic, rinse and hot-air drying stations. 1000 W, 25/33 kHz, up to 80 °C.
Samarth Electronics is an ISO 9001:2015 certified multi stage ultrasonic cleaner manufacturer based in Ambarnath, Maharashtra, and a direct multi stage ultrasonic cleaner supplier in Vadodara. As an established multi stage ultrasonic cleaner exporter, we build the same equipment for buyers in the UAE, Saudi Arabia, Bangladesh, Nepal, Kenya, Nigeria and Sri Lanka. Customers in Vadodara get export-grade quality at factory-direct prices.
A single ultrasonic tank removes contamination, but the parts come out wet and still carry dissolved soil and detergent. A multi-stage system adds dedicated stations so parts leave clean, rinsed and dry, ready for inspection, assembly, coating or packing.
In Vadodara, our multi stage ultrasonic cleaner is used by auto-component units in Halol and Savli; engineering and fabrication units in Makarpura GIDC and Savli; and electrical-equipment and switchgear makers around Vadodara. Units are dispatched from our Ambarnath factory to Vadodara in transit-safe packing, with installation guidance, operator training and spares support.
Samarth Electronics multi-stage systems usually include a pre-cleaning chamber (jet spray or air agitation to remove heavy soil), an ultrasonic cleaning chamber (precision cleaning with the right chemistry and temperature), a rinsing chamber (air agitation or jet spray) and a forced hot-air drying chamber. The standard SM30US ultrasonic stage has a 16" × 12" × 14" tank, 1000 W at 25 or 33 kHz, heated up to 80 °C. Two-stage and three-stage industrial versions, conveyor and dunking automation are available.
See the full product range on our Multi Stage Ultrasonic Cleaner page, or all equipment we supply in Vadodara.
Auto-component units in Halol and Savli use it for engine, fuel-system and transmission parts.
Engineering and fabrication units in Makarpura GIDC and Savli use it for machined and turned components.
Electrical-equipment and switchgear makers around Vadodara use it for contacts and electro-mechanical assemblies.
Plastics and moulding units in Halol and Savli use it for mould inserts and tooling.
Jet spray or air agitation removes heavy soil first.
1000 W at 25 or 33 kHz for precision cleaning.
Air agitation or jet spray removes loosened soil and detergent.
Forced hot-air chamber delivers dry parts.
Digital temperature and power controllers, up to 80 °C.
Conveyor, dunking, vapour/chiller stages and PLC control.
| Ultrasonic stage model | SM30US |
| Tank size | 16" × 12" × 14" (H) |
| Ultrasonic power | 1000 W |
| Frequency | 33 or 25 kHz ± 3 kHz |
| Temperature | Up to 80 °C |
| Stages | Pre-clean / ultrasonic / rinse / dry (2–5 stages) |
| Construction | SS 304 / SS 316L |
| Automation | Manual, conveyor, dunking or PLC |
Specifications may vary by model and custom configuration. Confirm with our team before ordering.
| Requirement | Recommended | Notes |
|---|---|---|
| Small batches, parts that must be dry | Two-stage (clean + rinse/dry) | Compact footprint |
| General production | Three-stage (clean + rinse + dry) | Most common configuration |
| Critical cleanliness / heavy soil | Four-stage (pre-clean + US + rinse + dry) | Jet / air agitation |
| High volume | Conveyor or dunking line | PLC controlled |
When parts must leave clean, rinsed and dry, ready for assembly, coating, inspection or packing, or when heavy soil would quickly contaminate a single tank.
Pre-cleaning (jet spray or air agitation), ultrasonic cleaning, rinsing, and forced hot-air drying. Passivation or vapour stages can be added.
The standard SM30US stage uses 1000 W at 25 or 33 kHz, heated up to 80 °C. Power and tank size are scaled to your parts.
Yes. Conveyor belts, dunking systems and PLC control are available for high-volume production.
Yes. Units are dispatched from our Ambarnath factory to Vadodara in transit-safe packing, with installation guidance, operator training and spares support. We cover Makarpura GIDC; Nandesari; Halol; Savli; Por; and Padra and the surrounding areas.
Call or WhatsApp +91 9320240250 / +91 9322916496, email response@ultrasoniccleanersmfgr.com, or use our online enquiry form. Tell us your application, sample or part size and daily quantity, and we will send a quotation with the recommended model.
See all ultrasonic cleaners & lab equipment we supply in Vadodara »
Tell us your application, sample or part size and daily quantity. Our engineers will recommend the right model and send a factory-direct quotation.