SM200US laboratory glassware ultrasonic cleaner: 20 L SS 304 tank, 400 W ultrasonic, 500 W heater, degas and pulse-sweep power.
Samarth Electronics is an ISO 9001:2015 certified glassware ultrasonic cleaner manufacturer in India and a direct glassware ultrasonic cleaner exporter to UAE. Buyers looking for a reliable glassware ultrasonic cleaner supplier in UAE get factory-direct pricing, a machine built for 230 V / 50 Hz, and complete export documentation, with no trading margin in between.
Lab glassware such as pipettes, burettes, volumetric flasks, cuvettes and test tubes is hard to clean by brushing. Residue stays in narrow necks and graduations and can affect your next result. An ultrasonic glassware cleaner uses cavitation to lift residue from every surface it touches, inside and out, without scratching.
In UAE, our glassware ultrasonic cleaner is used by food-testing, environmental and contract-testing labs; pharma manufacturers in Dubai, Sharjah and Abu Dhabi; and university and research labs across the Emirates. Export units for UAE are built for 230 V / 50 Hz and shipped by sea from Nhava Sheva (JNPT) to Jebel Ali, or by air to Dubai or Abu Dhabi, with a commercial invoice, packing list, certificate of origin and technical datasheets.
The Samarth Electronics SM200US glassware cleaner has a 20 L SS 304 tank, a 400 W ultrasonic generator at 33/40 kHz, a 500 W heater with digital temperature control up to 60 °C, and Pulse Swift Power for even distribution of energy. Degas mode removes dissolved air from fresh solution so cleaning starts at full strength.
See the full product range on our Glassware Ultrasonic Cleaner page, or all equipment we supply in UAE.
Food-testing, environmental and contract-testing labs use it for daily QC glassware.
Pharma manufacturers in Dubai, Sharjah and Abu Dhabi use it for analytical and process glassware.
University and research labs across the Emirates use it for teaching and research glassware.
Research centres in Abu Dhabi and Dubai use it for volumetric ware and sample vessels.
Holds volumetric flasks, burettes and racks of pipettes and test tubes.
33 / 40 kHz ± 3 kHz, from imported PZT transducers weld-bonded to the tank.
500 W heater, digitally settable up to 60 °C for faster residue removal.
On/off degassing removes dissolved air from fresh solution.
Uniform distribution of ultrasonic power across the tank.
0–99 minutes for repeatable lab cleaning cycles.
| Model | SM200US |
| Tank size | 14" × 12" × 8" (L × W × H) |
| Outer size | 17.4" × 16" × 16.8" |
| Capacity | 20 litres |
| Tank / enclosure | SS 304 / SS 304 |
| Ultrasonic power | 400 W |
| Heater | 500 W, up to 60 °C digital |
| Frequency | 33 / 40 kHz ± 3 kHz |
| Timer | 0–99 min digital countdown |
| Generator | MOSFET / IGBT based SMPS |
| Power input | 230 V AC |
| Accessories | Lid, basket, drain valve, operation manual |
Specifications may vary by model and custom configuration. Confirm with our team before ordering.
| Requirement | Recommended | Notes |
|---|---|---|
| Individual analyst / small lab | 6.5 L (SM65US) | 150 W ultrasonic, 500 W heater |
| QC department / pharma lab | 20 L (SM200US) | 400 W, 33/40 kHz |
| Long burettes & large flasks | 30 L or custom-length tank | Built to your longest item |
| High-volume glass washing | Custom multi-tank system | Wash + DI rinse + dryer |
Yes. At 33/40 kHz with a suitable lab detergent, cavitation removes residue without scratching or changing the graduations. Rinse with DI water after cleaning.
Most lab residues come off fastest at 50–60 °C. The SM200US heater is digitally settable up to 60 °C.
The standard 20 L tank is 14" × 12" × 8". For longer items we build tanks to your longest piece of glassware.
Use a mild alkaline lab detergent for general residues, or an acidic cleaner for mineral deposits. Avoid flammable solvents in a heated ultrasonic bath.
Units are built for 230 V / 50 Hz and shipped by sea from Nhava Sheva (JNPT) to Jebel Ali, or by air to Dubai or Abu Dhabi. Each shipment includes a commercial invoice, packing list, certificate of origin and technical datasheets.
Call or WhatsApp +91 9320240250 / +91 9322916496, email response@ultrasoniccleanersmfgr.com, or use our online enquiry form. Tell us your application, sample or part size and daily quantity, and we will send a quotation with the recommended model.
See all ultrasonic cleaners & lab equipment we supply in UAE »
Tell us your application, sample or part size and daily quantity. Our engineers will recommend the right model and send a factory-direct quotation.