Industrial ultrasonic cleaners for injectors, bearings, engine heads, hydraulic manifolds and die castings. 28/40 kHz, 6 L bench-top to 2,000 L+ lines.
Samarth Electronics is an ISO 9001:2015 certified automobile ultrasonic cleaner manufacturer based in Ambarnath, Maharashtra, and a direct automobile ultrasonic cleaner supplier in Vapi. As an established automobile ultrasonic cleaner exporter, we build the same equipment for buyers in the UAE, Saudi Arabia, Bangladesh, Nepal, Kenya, Nigeria and Sri Lanka. Customers in Vapi get export-grade quality at factory-direct prices.
Automotive parts-cleanliness requirements now include gravimetric and particle-count limits to VDA 19 / ISO 16232, especially for fuel-system and hydraulic components. Spray washing and manual scrubbing cannot reliably clean blind holes, threads and cross-drilled passages. Ultrasonic cavitation reaches every wetted surface.
In Vapi, our automobile ultrasonic cleaner is used by engineering units in Vapi, Bhilad and Silvassa and pharma and medical-device plants in Vapi GIDC and Daman. Vapi is a short road trip from our Ambarnath factory, so delivery, installation and service support are quick.
Samarth Electronics automobile ultrasonic cleaners run at 28 or 40 kHz (or dual frequency) with 30–80 W/L power density and hot alkaline chemistry at 55–80 °C. They remove cutting oil, coolant, carbon, grinding paste and metal fines. Configurations range from a single bench-top tank to PLC-controlled lines with wash, rinse, anti-rust passivation and hot-air drying, with conveyor or dunking automation.
See the full product range on our Ultrasonic Cleaner for Automobile Industry page, or all equipment we supply in Vapi.
Engineering units in Vapi, Bhilad and Silvassa use it for machined components before inspection.
Supplied to pharma and medical-device plants in Vapi GIDC and Daman.
30–80 W/L power density for oils, carbon and grinding paste.
55–80 °C for varnish, carbon and heavy grease.
Process records for technical-cleanliness audits.
Wash, rinse, passivation and dry in one line.
Conveyor for small parts, dunking hoist for parts with blind holes.
6 L bench-top to 2,000 L+ production lines.
| Frequency | 28 kHz / 40 kHz / dual-frequency |
| Power density | 30–80 W/L |
| Chemistry | Hot alkaline degreaser, 55–80 °C |
| Stages | 1 to 5 (wash / rinse / passivation / dry) |
| Tank sizes | 6 L bench-top to 2,000 L+ line |
| Automation | Manual / conveyor / dunking / PLC |
| Documentation | VDA 19 / ISO 16232 process records |
| Power supply | 230 V single-phase or 400 V three-phase |
Specifications may vary by model and custom configuration. Confirm with our team before ordering.
| Requirement | Recommended | Notes |
|---|---|---|
| Service centres, small batches | 6–30 L bench-top | Single tank, heater |
| Machining cell / Tier-2 supplier | 50–200 L two-stage | Wash + rinse |
| Fuel-system / hydraulic parts | Three- to five-stage line | Wash, rinse, passivation, dry |
| High-volume production | Conveyor or dunking PLC line | Built to cycle time |
Yes. When the process is validated with gravimetric and particle analysis, ultrasonic cleaning reliably meets technical-cleanliness limits. We match frequency, chemistry, filtration, rinse and drying to your part and provide process documentation.
Fuel injectors, carburettors, fuel pumps, bearings, gears, brake callipers, turbocharger housings, engine heads, hydraulic manifolds, valve bodies, die castings, transmission parts and most precision metal parts.
Hot alkaline degreaser (pH 9–11) at 55–70 °C for oils and grinding paste, a mild aluminium-safe alkaline for die castings, and anti-rust passivation as the final stage for bare steel parts.
In most cases, yes. Ultrasonic alkaline cleaning reaches blind holes that spray cannot, is faster than soak degreasing, and removes the VOC and fire risks of solvents.
Yes. Vapi is a short road trip from our Ambarnath factory, so delivery, installation and service support are quick. We cover Vapi GIDC; Sarigam; Umbergaon; Bhilad; Valsad; and Pardi and the surrounding areas.
Call or WhatsApp +91 9320240250 / +91 9322916496, email response@ultrasoniccleanersmfgr.com, or use our online enquiry form. Tell us your application, sample or part size and daily quantity, and we will send a quotation with the recommended model.
See all ultrasonic cleaners & lab equipment we supply in Vapi »
Tell us your application, sample or part size and daily quantity. Our engineers will recommend the right model and send a factory-direct quotation.